Small Pressure Sensor 11
Compact size pressure sensor. Small sized sensor of 24.5mm length x 10mm width.
- Compact size Pressure Sensor
- Small sized sensor of 24.5mm length x 10mm width
- Use of an analog output type and display (SED-31 series) can make a separate display system
- Three types of pressure introduction configuration is prepared
Stem, Male thread, and Union type are available. - 3 types of pressure range and 6 types of output specification
3 pressure ranges； positive pressure range, negative pressure range, and compound pressure range and 2 output specifications； switch output and analog output making 6 different types of output specifications - Copper alloy free material and against low ozone concentration on the air flow path
Metal parts material is non-copper metals. HNBR for seal rubber material.
- General spec.
| Operating pressure range | Negative pressure type: -100～0kPa Compound pressure type: -100 ~ 300kPa Positive pressure type: 0～1.0MPa |
|---|---|
| Proof pressure | Negative pressure type: 200kPa Compound pressure type: 600kPa Positive pressure type: 1.5MPa |
| Fluid medium | Air, non-corrosive/non-flammable gas |
| Pressure detection | Diffused metaloxide semiconductive pressure transduce, Gauge pressure |
| Power supply | 10.8～30VDC (Including Ripple） |
| Current consumption | 20mA or less (No-load at 24VDC) |
| Storage temp. range | -20～70°C (Atmospheric pressure, Humidity:60% RH or less) |
| Operating temperature range | 0～60°C (No freezing) |
| Operating humidity range | 35~85% RH (No dew condensation) |
| Protective structure | IEC standard IP40 equiv. |
- Switch output type
| No. of pressure setting | 1 |
|---|---|
| Switch output | NPN open collector/30V 80mA or less (Residual voltage: 0.8V or less) |
| Operation indicator | N.O. (Red LED turns on when pressure is above the setting.) |
| Hysteresis | Fixed (2% F.S. or less) |
| Operating accuracy | ±3% F.S. or less (at Ta=25℃） |
| Response time | About 1msec |
| Pressure setting range | Positive type:0～1.0MPa/Nagative ｔype:-100～ 0kPa/Conpoumd type:-100～300kPa |
- Analog Output Type
| Output voltage | 1～5V |
|---|---|
| Zero-point voltage | 1 ±0.1V |
| Voltage at setting pressure | 5 ±0.1V (at -100kPa) |
| Output current | 1mA or less (Load resistance:5kΩ) |
| Temperature characteristics | ±2%F.S.or less (at Ta=25°C) |
| Linearity | ±0.5% F.S. or less (at Ta=25°C) |
CAD download 
VP-S Sponge type
Holder: Fixed type, Spring type. Cup: Sponge type.
Best suitable for work with uneven surface such as an external wall material of building, small stone and seashell.
VP-LB Soft bellows type
Holder: Fixed type, Spring type, Direct mount type. Cup: Soft bellows type.Best suitable for extracting plastic products or conveying fragile work.
VP-B Bellows type
Holder: Fixed type, spring type. Cup: Bellows type.
Best suitable for retort packagings or bags for packaged foods.
VP-W Multi-bellows type
Holder: Fixed type, Spring type. Cup: Multi-bellows type.
Best suitable for retort packagings or bags for packaged foods.
VP-E Oval type
Holder: Fixed type, Spring type, Screwed type. Cup: Oval type.
Best suitable for substrate or long work like semiconductor.
VP-P Ultrathin type
Holder: Fixed type, spring type. Cup: Ultrathin type.Optimal for transporting thin components, such as paper, vinyl sheets.
VP-Q Mark-free type
Holder: Fixed type, spring type. Cup: Mark-free type.
Best suitable for transporting LCD and transportation in painting and semiconductor manufacturing process.
VP-L Soft type
Holder: Fixed type, Spring type, Direct mount type. Cup: Soft type.Best suitable for extracting plastic products or conveying fragile work.